Josephs Affordable Plumbing and Heating

Signs of a refrigerant leak: unit runs but doesn't reach temperature, ice buildup on evaporator coil, hissing or bubbling sounds from refrigerant lines, oily residue near connections or fittings, and higher than normal electricity consumption. Only EPA-certified technicians can legally handle refrigerant. If you suspect a leak, call a technician promptly — operating a refrigerator with low refrigerant damages the compressor.

High-temperature commercial dishwashers must reach 180°F (82°C) at the final rinse to achieve proper sanitization per NSF and health department standards. Low-temperature chemical sanitizing machines must maintain proper chemical concentrations (chlorine, iodine, or quaternary). If your high-temp machine isn't reaching 180°F, it's not properly sanitizing and may fail health inspection. Call a technician immediately.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.