Preventative Maintenance Service

Chemical dispensing problems are typically caused by: clogged or faulty chemical pumps, incorrect dilution ratios, empty chemical containers, broken injection lines, or control board issues. In low-temperature machines, proper chemical concentration is essential for sanitization — test strips should verify concentration after every repair. Many chemical distributors offer free testing; alternatively, a technician can verify and repair the dispensing system.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

A compliant hood cleaning includes: complete degreasing of the hood canopy, all grease filters, the entire ductwork system from hood to exhaust fan discharge, and the exhaust fan and housing. Areas that cannot be thoroughly cleaned must be documented. Cleaning must be performed by a qualified company and documented with service report and before/after photos. The technician should leave a dated sticker on the equipment and provide a compliance certificate.