Willies Heating & Cooling

Chemical dispensing problems are typically caused by: clogged or faulty chemical pumps, incorrect dilution ratios, empty chemical containers, broken injection lines, or control board issues. In low-temperature machines, proper chemical concentration is essential for sanitization — test strips should verify concentration after every repair. Many chemical distributors offer free testing; alternatively, a technician can verify and repair the dispensing system.

Critical food safety temperatures: Cold holding — 40°F (4°C) or below for refrigeration; freezer 0°F (-18°C) or below. Hot holding — 140°F (60°C) or above for steam tables and food warmers. Cooking temperatures vary by food type (145°F-165°F). Dishwasher final rinse — 180°F (82°C) for high-temp machines. Any equipment consistently failing to maintain these temperatures is both a safety risk and a health code violation.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.